AA30.ZERO RigExpert™

Rigexpert Aa 30. RIGEXPERT AA30 analizator antenowy KF RigExpert AA-30 - Specifications Frequency range: AA-30: 0.1 to 30 MHz, AA-54: 0.1 to 54 MHz Frequency entry: 1 kHz resolution SWR measurement range: 1 to 10 SWR measurement for 50 and 75-Ohm systems SWR display: numerical or easily-readable bar R and X range: 0…1000, -1000…1000 in numeric en; uk; ja; Every job needs the right tool. RigExpert AA-30 RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines

The following tasks are easily accomplished by using RigExpert AA-30 and AA-54: Rapid check-out of an antenna; Tuning an antenna to resonance The device is basically a RigExpert AA-30 ana-lyzer, but without the enclosure, dis-play, and keypad

AA30.ZERO RigExpert™

RigExpert AA-30.ZERO HF Antenna Analyzer Project Boards are the most affordable vector HF antenna analyzer in the world! Radio amateurs and DIY-hobbyists asked for a measuring tool that can be easily integrated into projects RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers)

RigExpert AA30 Zero. Are .ZERO ready for use? Yes, it has everything necessary on board, so the user can connect .ZERO to the PC (through USB-to-RS232 adaptor) and perform all the usual sets of. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna

RigExpert AA30 Zero. AA-30 Testing When checked against the 10 MHz WWV signal, the AA-30's frequency was off by about 70 Hz, well within the RigExpert AA-30 0.1 to 30 MHz Antenna Analyzer RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines